Sewage backups and drain overflows in Moulton are among the most hazardous water damage events a property can experience. Category 3 black water — raw sewage, backed-up drain lines, toilet overflows — carries bacteria, viruses, and pathogens at concentrations that make any contact a serious health risk. COS Water Damage Restoration's Moulton sewage cleanup team is trained, equipped, and certified under IICRC S520 protocols for Category 3 biohazard remediation — from containment through full restoration.
📞 Call +1-844-499-0972 — Moulton Sewage ResponseSewage cleanup in Moulton is not a standard water damage job. The contamination levels, regulated disposal requirements, containment procedures, and sanitization standards that apply to Category 3 events are fundamentally different — and using a company without specific Category 3 training and equipment leaves your property and your household at risk.
COS Water Damage Restoration's Moulton sewage cleanup crew operates under IICRC S520 standard — the industry's governing protocol for Category 3 contaminated water remediation. This covers the specific containment requirements, the PPE standards that protect our crew from pathogen exposure, the material removal requirements (what can be safely dried versus what must be removed and disposed of as a regulated waste stream), and the multi-application antimicrobial sanitization protocol that must be completed before any structural drying begins.
Sewage-contaminated materials removed from Moulton properties — carpet, pad, drywall, insulation, and any porous material that absorbed Category 3 water — require regulated waste handling and disposal. Our Moulton crew bags, labels, and disposes of all contaminated material to applicable AL regulatory requirements. No dumping in standard refuse. No leaving contaminated materials in dumpsters that aren't rated for biohazard waste.
One application of sanitizer after a sewage event is not sufficient. Our protocol uses multiple applications with documented dwell times.
Our Moulton claim coordinators handle the insurance piece. We can coordinate clearance testing when it's required.
Here's what our certified Moulton Sewage Cleanup crew handles on every job.
The first action our Moulton sewage crew takes on any Category 3 event is establishing negative-pressure containment — critical plastic sheeting barriers that prevent sewage contamination from spreading into unaffected areas of the property through airborne particles, foot traffic, and air circulation. Containment also controls odor migration within the property while remediation is underway. Simultaneously, we identify and coordinate the correction of the blockage or failure that caused the backup — whether that's a main line obstruction, a failed cleanout, or a sump failure — so that remediation isn't interrupted by a secondary event.
Extracting Category 3 sewage water from a Moulton property requires specific PPE — full protective suits, respirators rated for biological hazard, and disposable boots — for every technician in the contamination zone. We use dedicated contaminated-water extraction equipment that is not shared with standard water damage jobs and is properly sanitized between uses. After extraction, all materials that contacted Category 3 water and cannot be decontaminated to a safe standard — carpet, pad, standard drywall, fiberglass insulation, and any non-cleanable surface materials — are removed as regulated waste, bagged in approved containers, and disposed of under AL biohazard material regulations.
After material removal, every remaining structural surface — framing, subfloor sheathing, masonry, concrete, and any hard surface that contacted sewage water in your Moulton property — receives a multi-phase sanitization treatment using EPA-registered, hospital-grade antimicrobial and antifungal agents. The sanitization sequence includes spray application, documented dwell time, surface contact, and at minimum one additional application after the first dwell cycle. This is not a one-spray process. The S520 protocol our Moulton team follows is designed to address the pathogen load that Category 3 water deposits on structural surfaces.
Category 3 sewage events leave odor-causing compounds embedded in structural materials, in the air space above the affected area, and — in HVAC systems — potentially distributed throughout the property. Our Moulton team uses hydroxyl generator technology and botanical-based counteractant treatments to neutralize sewage odor compounds in the air and on surfaces, not mask them. For properties where HVAC ductwork may have been exposed to Category 3 contamination, duct isolation and decontamination is included in our scope evaluation.
Our Moulton claim coordinators have processed Category 3 claims across AL carriers. We know what gets approved on first submission.
One company from sewage backup to finished reconstruction. No coordination gap, no separate contractor handoff.


Sewage events require immediate evacuation of affected areas. Our dispatcher will confirm this on the call.
Containment before contact. Source identified and addressed before cleanup proceeds.
After initial containment and source control, our Moulton project manager assesses the full Category 3 contamination extent, identifies all materials requiring removal, and prepares a written Xactimate-based scope covering extraction, material removal, sanitization, structural drying, and reconstruction. You review the scope and the cost before any material removal or treatment begins. If insurance is involved, the claim is filed the same day.
From sewage event to finished property — documented, guaranteed, and handled by one company.



"When our basement drain backed up in Moulton, I didn't realize I was dealing with a sewage event until the smell made it obvious. COS Water Damage Restoration arrived within the hour, set up containment before anyone entered the space, and explained the Category 3 protocols clearly — including why certain materials had to be removed and couldn't just be dried in place. They disposed of everything properly, treated all surfaces with a sanitization protocol I could actually track through each step, and filed the insurance claim the same day. The reconstruction brought the basement back completely. I feel good about the space now, and that was not a given after the event."
"The thing that stood out with COS Water Damage Restoration's Moulton sewage cleanup team was the containment setup — I've seen other companies skip it or do it loosely, and you can tell they don't understand why it matters. This team had proper negative-pressure containment up before they extracted a gallon of water. The two-phase sanitization after material removal, the hydroxyl generator running during drying, the final surface swab coordination — this was a Category 3 remediation done to the actual standard, not a watered-down version of it."
"I've used general contractors for water damage before with mixed results. After calling COS Water Damage Restoration for a sewage event in Moulton, I understand the difference between a certified Category 3 remediation team and a general restoration company that 'also does sewage.' The protocols aren't comparable."
COS Water Damage Restoration's certified Category 3 sewage cleanup team serves Moulton and surrounding communities throughout AL. Call +1-844-499-0972 to confirm same-day service at your address.
Sewage contamination requires certified remediation — not a general cleanup crew. Call +1-844-499-0972 and our Moulton Category 3 team responds fast, contains the event, and remediates to the standard that protects your household.
📞 Call +1-844-499-0972 — Moulton Sewage Response24/7 Response · IICRC S520 Certified · Category 3 Protocols · Moulton, AL